CCJH Sliding Barn Door Hardware Kit. (Hardware Only, Door not include). High Quality Steel ;Surface: Frosted Black Pre-Drilled Track. Kness: From 1.18" To 1.96" (30mm-50mm).
Diameter of the roller: 2.75 inch/7cm. Min distance between the door and ceiling: 5 inch. Track width is 1.57"/4cm, thickness is 0.24"/6mm. If door thickness is 1.57"/4cm, the distance from the door to wall about 0.4"/1cm.
Hangers: Stainless Steel; Rails: Space Aluminum Nickel Plating. The distance from the wall to the rail is 0.78 (20mm). HOW TO CHOOSE TRACK SIZE.
Single Door Min Track Size= 2 × Single Door panel Width. Example: For a 3FT door, recommen. D you choose a 6FT track at least. Double Door Min Track Size= 4 × Single Door panel W. Example: For a 3FT door, recommend you choose a 12FT track at least.
2 doors just slide on the opening space and cannot be put away to the near wall. Ze= 2 × Single Door panel Width. 2 doors overlapped onto each other can be slid to the one side wall. Track Size= 3 × Single Doo.2 doors can be s. Lid on the either sides wall. Track size= 4 × Single Door panel Width. Wall Hangers; Wood plug, Roller Screws and Install manual. Wall Hangers; Wood plug, Roller Screws and Bypass Brackets.
Tip: if you order 7FT Track, you will get 27FT Tracks. Topper makes no sounds when opening and closing doors, minimize the impact to track. Prevent door bottom from swinging back. Rotect the rail screws and wall surface, keeps whole system runs. The item "5-16FT Sliding Barn Door Hardware Closet Track Kit for Single/Double/Bypass Door" is in sale since Thursday, October 25, 2018.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Closet & Sliding Door Hardware". The seller is "xihaoltd" and is located in La Puente, California.
This item can be shipped to United States, all countries in Europe, Canada, Australia.