Horseshoe flat track encourage the spirit of a bygone era where, on the farm, horseshoe style were often utilized. Exhibiting design restraint, elegant proportions, and boasting a total of four wheels per door, this rugged hardware is a real workhorse. This decorative side-mounted horseshoe barn door hardware system is built from heavy-duty carbon steel with Quality powder-coated rough finish that will not only offer a reliable, long-lasting performance, but blends flawlessly with most decor. All parts tested with salt water spray. (1) 6.6ft two-pieces rail(2x3.3ft), made out of quality steel.(5) Spacers, used to keep space between the wall and the rail. (2) Rollers, made of carbon steel hanger and nylon wheel with ball bearing. (2) Door Stops, used to adjust and control the rolling distance. (1) Floor Guide, to prevent door from shifting, door bottom groove is required. (2) Anti-jump discs prevent hanger wheels from jumping off the track. (1) Hex tools and all hardware fasteners. The length of rail should be at least twice of width of door panel. The recommended space between door top and roller top is 5-1/8 inch, Please leave enough space from your ceiling. In case of directly mounting on wall, the final gap between door and wall is about(1/4" to 13/16") which depends on door thickness. Only the hardware is for sale.
Rail can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide. Your advice is welcome at any time. The item "6.6ft Black Steel Sliding Barn Door Hardware Track Set, 2 Rails, Horseshoe Hanger" is in sale since Wednesday, January 13, 2021.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "barndoorfactorydirect" and is located in Brampton,ON.
This item can be shipped to Canada.