LWZH American Style Wooden Sliding Barn Door DIY Hardware Kit Black Steel Roller Track Closet Hardware for Single Door. PLS NOTE: ONLY the hardware kit is for sale, door panel is not included.
This hardware kit is for single door. All accessories and step-by-step instructions with pictures included. High quality steel for high weight capacity. Quality bearing steel keep the wheels run smoothly in track.Is popular to be installed in. Bedroom, study room, living room, kitchen, bathroom, closet etc. Which can match with different styles and different colors of doors for the simple and artistic style.
Push-pull opening and closing way saves lots of space which is quite suitable for modern decoration style. Due to the simple design of the slide, no installation experience is needed, just follow the simple installation instructions.Choose Door Width and Sliding Roller. Door Width=(Door Opening Width+100mm)/2. Single door opening width 800mm, door width at least needs to be 900mm. Double door opening width 1500mm, door width at least needs to be 800mm. Notice: Please note 100mm is the least to add. 2 Confirm Length of Sliding Rail. Sliding Rail Length > Door Width2. Sliding Rail Length > Door Width4. The clearance from the top of the door to the ceiling is about 6.
The clearance between door panel and wall is about 5/8" if take 1 3/5" thick door for example. Measure the Wall and Drill Holes. Different sliding rail sizes require different measurements and hole quantites, please measure first and use a pencil mark on the wall. Then you can drill holes as suggested.
Please note percussion bit size for wooden door is 5mm and concrete wall is 10mm. Install Anchoring Screws (Concrete Wall). Wooden Wall: Use the hammer to punch the screw in, then use the wrench to twist the screw until it is fixed.(1) Put the anti-jump disk to the edge of the door and fix it first (2) Then spin it to the center of the door and screw the disk. Install Floor Guide and Adjust Door Stops.
Position: 25mm from the wall to the center line of the floor guide holes. Distance between the wall and inside holes is 24mm. Measurements: Two holes, distance 24mm, use a 6mm bit, hole depth 30mm. To Canada may course CAD 15-30 for reference.To European country may course EUR 35-50 for reference. For detailed cost, pls kindly ask your local custom. If you are satisfied with our items and service. Pls kindly give us 5 Stars. Then we will try our best to solve any problem and provide you with the best customer services. The item "Barn Door Hanging Rail Europe Rustic Black Sliding Hardware Big-wheel Cabinet" is in sale since Wednesday, April 28, 2021. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "lwzh201818" and is located in Shenyang. This item can be shipped worldwide.