Big Spoke Wheel Sliding Barn Door Hardware. Hardware only, not including door panel. Full set kit including: Big wheel2, Stopper2,5FT Track1, Floor guide1, Anti-pad2;Track&wall connector4. If the frame thicker than 1/2, remove the frame mouldings to minimize door undercut. If you do not remove them, use extra spacers(not included) or install a piece of wood (not included) of the same thickness and length as the mouldings before installing the new hardware to ensure door undercut.
Do not install directly onto drywall or other hollow wall. Such surfaces are not strong enough to support the total active weight of the track and door.Every fastener used to attach the track to the wall must be fastened securely into a structural surface. The height from top of the door to the top of the roller is 7 3/8, pls check if your wall have enough space to install this kit before order! The gap between door and wall is 16/25", if you have thick(thickness more than 1/2") baseboard or door frame, pls try to add a wood board on the back side of the track to make a bigger gap. Drill holes on the door panel. First center hole to the top of the door:1-9/16. Center length between two holes:3-9/16. Door panel need cut a groove for floor guide. The item "Industrial Wheel Sliding Barn Wood Interior Closet Kitchen Door Track Hardware" is in sale since Monday, March 4, 2019.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "shengyinhardware" and is located in Milton, ON. This item can be shipped to Canada.